MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible. May be installed but the operation not guaranteed. NOT compatible.
Under Development. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜S710W
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
Including TAX
Excluding TAX		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 RIDE
HEIGHT
CHANGE
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
DAIHATSU

ATRAI

2021.12+		660

4WD		S710WDECKVAN
VSAKC-C1BS3
JPY 151,800 inc
JPY 138,000 exc
Good
in
stock		F

R/U
-20-54to+949.0/5.0
-30to-10175/Φ70
R

STD
-25-30to-2049.0/5.0
-30to-20210/
[ NOTE ] RR: 3-LEVEL RIDE HEIGHT ADJUSTMENT BY 5MM WITH THE USE OF SPACER. 
DAIHATSU

ATRAI

2021.12+		660

4WD		S710WDECKVAN
VSAKC-G1BA2
JPY 134,200 inc
JPY 122,000 exc
Good
in
stock		F

STD
+30-2to+3734.3/3.5
+20to+37265/
R

STD
+20+10to+2052.5/5.4
+10to+20245/
[ NOTE ] RR: 3-LEVEL RIDE HEIGHT ADJUSTMENT BY 5MM WITH THE USE OF SPACER. 
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.