MAKE MODEL YEAR
Product MATRIX
Product LIST
Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible. May be installed but the operation not guaranteed. NOT compatible.
Under Development. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT|ZWE219H
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
MODEL

YEAR
ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD
CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y
PRODUCT NAME PART NUMBER

MSRP
Including TAX
Excluding TAX
STOCK

SCHED
I
n
c
l
u
d
e
S
P
R
I
N
G
S
E
D
F
C
C
O
M
P
A
T
I
B
I
L
I
T
Y
  DAMPING
FORCE
ADJUST-
MENT
FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE
UPPER
MOUNT
RIDE
HEIGHT
CHANGE
(mm)
RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)
SPRING
MAX
LOW - HI
RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI
FREE
LENGTH
(mm)
/ I.D.(mm)
TOYOTA

COROLLA SPORT HYBRID

2022.10+
1800

FF
ZWE219HG, GZ, GX
VSTK6-C1AS3
JPY 157,300 inc
JPY 143,000 exc
Good
in
stock
F

R/U
-30-68to-258.8/6.0
-40to-20170/
R

R/U
-40-75to-1451.0/5.2
-50to-30245/
[ NOTE ] EXCLUSIVELY FOR VEHICLE NOT EQUIPPED WITH AVS. FT: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. FT/RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT'S DIFFICULT TO ADJUST DAMPING FORCE BY HAND. 
TOYOTA

COROLLA SPORT HYBRID

2022.10+
1800

FF
ZWE219HG, GZ, GX
GSTK6-91AS3
JPY 117,700 inc
JPY 107,000 exc
5 leftF

STD
-30-60to-649.0/5.0
-40to-20232/
R

R/U
-40-75to-1446.1/4.7
-50to-30245/
[ NOTE ] EXCLUSIVELY FOR VEHICLE NOT EQUIPPED WITH AVS. FT: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. 

Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.