MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible. May be installed but the operation not guaranteed. NOT compatible.
Under Development. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜CY3A
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
Including TAX
Excluding TAX		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 RIDE
HEIGHT
CHANGE
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
MITSUBISHI

GALANT FORTIS

2009.12-2011.10		1800

FF		CY3ASPORT, SUPER EXCEED, EXCEED
GSE20-81SS2
JPY 90,200 inc
JPY 82,000 exc
5 leftF

STD
-45-78to-3058.8/6.0
-55to-35225/Φ70
R

STD
-45-84to-2349.0/5.0
-55to-35225/Φ65
MITSUBISHI

GALANT FORTIS

2009.12-2011.10		1800

FF		CY3ASPORT, SUPER EXCEED, EXCEED
VSE20-C1SS4
JPY 118,800 inc
JPY 108,000 exc
Good
in
stock
F

CAMBER ADJ
-45-84to-2888.3/9.0
-55to-35175/Φ70
R

R/U
-40-81to-868.6/7.0
-50to-30175/Φ70
MITSUBISHI

GALANT FORTIS

2009.12-2011.10		1800

FF		CY3ASPORT, SUPER EXCEED, EXCEED
Discontinued. Limited stock left.
GSE20-11SS2
JPY 91,300 inc
JPY 83,000 exc
1 leftF

STD
-45-78to-2958.8/6.0
-55to-35225/Φ70
R

STD
-45-79to-2049.0/5.0
-55to-35225/Φ70

     [OE SHAPE] SINGLE DAMPER
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE PRODUCT NAME C
O
M
P
A
T
I
B
I
L
I
T
Y		 FRONT
REAR		 PART NUMBER

MSRP
Including TAX
Excluding TAX		 STOCK

SCHED
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
 DAMPING
FORCE
ADJUST-
MENT		 UPPER
MOUNT		 RIDE
HEIGHT
CHANGE
(W/ OE
SPRING
USED)
(mm)
 NOTE
MITSUBISHI

GALANT FORTIS

2009.12-2011.10		1800

FF		CY3ASPORT, SUPER EXCEED, EXCEEDFRONT
LEFT
VSE20-A1MS2-L
JPY 22,000 inc
JPY 20,000 exc
3 left

STD
+ / - 0 
FRONT
RIGHT
VSE20-A1MS2-R
JPY 22,000 inc
JPY 20,000 exc
3 left

STD
+ / - 0 
REAR
VSE21-A1MS2
JPY 13,200 inc
JPY 12,000 exc
4 left

STD
+ / - 0 
MITSUBISHI

GALANT FORTIS

2009.12-2011.10		1800

FF		CY3ASPORT, SUPER EXCEED, EXCEEDFRONT
LEFT
VSE20-B1MS2-L
JPY 24,200 inc
JPY 22,000 exc
2 left

STD
+ / - 0 
FRONT
RIGHT
VSE20-B1MS2-R
JPY 24,200 inc
JPY 22,000 exc
2 left

STD
+ / - 0 
REAR
VSE21-B1MS2
JPY 15,400 inc
JPY 14,000 exc
2 left

STD
+ / - 0RR: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. 
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.