MAKE MODEL YEAR
Product MATRIX
Product LIST
Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible model. May be installed but the operation not guaranteed. NOT compatible
Specific model that the product will be developed for and tested on. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT|GJEFP
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
MODEL

YEAR
ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD
CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y
PRODUCT NAME PART NUMBER

MSRP
(excl. TAX)
STOCK

SCHED
I
n
c
l
u
d
e
S
P
R
I
N
G
S
E
D
F
C
C
O
M
P
A
T
I
B
I
L
I
T
Y
  DAMPING
FORCE
ADJUST-
MENT
FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE
UPPER
MOUNT
BASE
RIDE
HEIGHT
DROP
(mm)
RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)
SPRING
MAX
LOW - HI
RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI
FREE
LENGTH
(mm)
/ I.D.(mm)


ATENZA SEDAN

2012.11+
2000

FF
GJEFP20S
GSMB0-91AS3
4582202762697
JPY 96,000
4 left
F

STD
-30-55to-1149.0/5.0
-40to-20235/
R

R/U
-40-58to-2249.0/5.0
-50to-30241/


ATENZA SEDAN

2012.11+
2000

FF
GJEFP20S
VSMB0-C1AS3
4582202760914
JPY 117,000
1 left
F

R/U
-30-63to-858.8/6.0
-40to-20200/Φ70
R

R/U
-40-58to-2249.0/5.0
-50to-30241/

     [OE SHAPE] SINGLE DAMPER
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
MODEL

YEAR
ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD
CHASSIS CODE GRADE PRODUCT NAME C
O
M
P
A
T
I
B
I
L
I
T
Y
FRONT
REAR
PART NUMBER

MSRP
(excl. TAX)
STOCK

SCHED
E
D
F
C
C
O
M
P
A
T
I
B
I
L
I
T
Y
DAMPING
FORCE
ADJUST-
MENT
UPPER
MOUNT
NOTE
MAZDA

ATENZA SEDAN

2012.11+
2000

FF
GJEFP20SFRONT
LEFT
VSMB0-A1MS2-L
JPY 20,000
3 left

STD
 
FRONT
RIGHT
VSMB0-A1MS2-R
JPY 20,000
3 left

STD
 
REAR
VSMB1-A1MS2
JPY 10,000
Good
in
stock

STD
 
MAZDA

ATENZA SEDAN

2012.11+
2000

FF
GJEFP20SFRONT
LEFT
VSMB0-B1MS2-L
JPY 24,000
2 left

STD
 
FRONT
RIGHT
VSMB0-B1MS2-R
JPY 24,000
2 left

STD
 
REAR
VSMB1-B1MS3
JPY 24,000
4 left

R/U
 INCLUDES REINFORCED RUBBER MOUNT.INCLUDES BUMP RUBBER & DUST BOOT.

Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.