MAKE MODEL YEAR
Product MATRIX
Product LIST
Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
 
 
Marks of compatibility:
Compatible model. May be installed but the operation not guaranteed. NOT compatible
Specific model that the product will be developed for and tested on. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜J32
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 BASE
RIDE
HEIGHT
DROP
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
NISSAN

TEANA

2008.06-2014.01		2500

FF		J32250XV, 250XL, 250XE, 250XL PREMIUM SELECTION
Equivalent of
FLEX SEDAN
CM-DSK12-61AS3
JPY 232,000
Made-to-order

Approx. 1.5 months
after receipt
of order
F

R/U
-25-50to-578.5/8.0
-35to-15200/Φ70
R

R/U
-15-40to-268.6/7.0
-25to-5203/
[ NOTE ] RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT IS DIFFICULT TO ADJUST DAMPING FORCE BY HAND DUE TO VEHICLE STRUCTURE. 

     SINGLE DAMPER
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME FRONT
REAR		 PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
 DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 SET SPRING
RATE
(N/mm / Kgf/mm)
FREE
LENGTH
(mm)		 / I.D.(mm)
NISSAN

TEANA

2008.06-2014.01		2500

FF		J32250XV, 250XL, 250XE, 250XL PREMIUM SELECTIONFRONT
LEFT
VSK12-A1MS2-L
JPY 20,000
4 left

STD
 
 
NISSAN

TEANA

2008.06-2014.01		2500

FF		J32250XV, 250XL, 250XE, 250XL PREMIUM SELECTIONFRONT
RIGHT
VSK12-A1MS2-R
JPY 20,000
4 left

STD
 
 
NISSAN

TEANA

2008.06-2014.01		2500

FF		J32250XV, 250XL, 250XE, 250XL PREMIUM SELECTIONREAR
VSK13-A1MS2
JPY 10,000
Good
in
stock

STD
 
 
[ NOTE ] OE DUST BOOT NEEDS TO BE MODIFIED. 
NISSAN

TEANA

2008.06-2014.01		2500

FF		J32250XV, 250XL, 250XE, 250XL PREMIUM SELECTIONFRONT
LEFT
VSK12-B1MS2-L
JPY 22,000
3 left

STD
 
 
NISSAN

TEANA

2008.06-2014.01		2500

FF		J32250XV, 250XL, 250XE, 250XL PREMIUM SELECTIONFRONT
RIGHT
VSK12-B1MS2-R
JPY 22,000
3 left

STD
 
 
NISSAN

TEANA

2008.06-2014.01		2500

FF		J32250XV, 250XL, 250XE, 250XL PREMIUM SELECTIONREAR
VSK13-B1MS2
JPY 12,000
Good
in
stock

STD
 
 
[ NOTE ] OE DUST BOOT NEEDS TO BE MODIFIED. 
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.