MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible model. May be installed but the operation not guaranteed. NOT compatible
Specific model that the product will be developed for and tested on. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜JW5
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
Including TAX
Excluding TAX		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 RIDE
HEIGHT
CHANGE
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
HONDA

S660

2015.04+		660

MR		JW5ALPHA, BETA
GSHG8-81SS2
JPY 90,200 inc
JPY 82,000 exc
Good
in
stock		F

STD
-15-40to+024.7/2.5
-25to-5200/
R

STD
-15-40to+332.2/3.3
-25to-5225/
[ NOTE ] FOR VEHICLES WITH FOG LIGHTS, IF THE POSITION OF THE FOG LIGHT IS LESS THAN 250MM FROM THE GROUND, IT MAY NOT COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS. PLEASE ADJUST RIDE HEIGHT SO THE DISTANCE IS OVER 250MM. 
HONDA

S660

2015.04+		660

MR		JW5ALPHA, BETA
VSHG8-C1SS4
JPY 140,800 inc
JPY 128,000 exc
Good
in
stock
F

CAMBER ADJ
-15-48to+1639.2/4.0
-25to-5150/
R

R/U
-15-46to+1349.0/5.0
-25to-5200/Φ70
[ NOTE ] FOR VEHICLES WITH FOG LIGHTS, IF THE POSITION OF THE FOG LIGHT IS LESS THAN 250MM FROM THE GROUND, IT MAY NOT COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS. PLEASE ADJUST RIDE HEIGHT SO THE DISTANCE IS OVER 250MM. AVOID SETTING RR CASE LENGTH OVER 332MM, TO PREVENT INTERFERENCE WITH BODY. 
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.