MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible model. May be installed but the operation not guaranteed. NOT compatible
Specific model that the product will be developed for and tested on. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜RH16
     [OE SHAPE] SINGLE DAMPER
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE PRODUCT NAME C
O
M
P
A
T
I
B
I
L
I
T
Y		 FRONT
REAR		 PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
 DAMPING
FORCE
ADJUST-
MENT		 UPPER
MOUNT		 RIDE
HEIGHT
CHANGE
(W/ OE
SPRING
USED)
(mm)
 NOTE
MINI

MINI CONVERTIBLE (R52)

2004.09-2009.03		1600

FF		RH16COOPER SFRONT
LEFT
VSG74-A1MS2-L
JPY 20,000
2 left

STD
+ / - 0NOT COMPATIBLE WITH VEHICLES MANUFACTURED IN MAR 2002 OR EARLIER. "MANUFACTURING DATE" DIFFERS FROM "DATE OF VEHICLE REGISTRATION", SO PLEASE VERIFY WITH THE MANUFACTURE FOR EXACT INFORMATION. 
FRONT
RIGHT
VSG74-A1MS2-R
JPY 20,000
2 left

STD
+ / - 0NOT COMPATIBLE WITH VEHICLES MANUFACTURED IN MAR 2002 OR EARLIER. "MANUFACTURING DATE" DIFFERS FROM "DATE OF VEHICLE REGISTRATION", SO PLEASE VERIFY WITH THE MANUFACTURE FOR EXACT INFORMATION. 
REAR
VSG75-A1MS2
JPY 12,000
4 left

STD
+ / - 0NOT COMPATIBLE WITH VEHICLES MANUFACTURED IN MAR 2002 OR EARLIER. "MANUFACTURING DATE" DIFFERS FROM "DATE OF VEHICLE REGISTRATION", SO PLEASE VERIFY WITH THE MANUFACTURE FOR EXACT INFORMATION. 
MINI

MINI CONVERTIBLE (R52)

2004.09-2009.03		1600

FF		RH16COOPER SFRONT
LEFT
VSG74-B1MS2-L
JPY 22,000
2 left

STD
+ / - 0NOT COMPATIBLE WITH VEHICLES MANUFACTURED IN MAR 2002 OR EARLIER. "MANUFACTURING DATE" DIFFERS FROM "DATE OF VEHICLE REGISTRATION", SO PLEASE VERIFY WITH THE MANUFACTURE FOR EXACT INFORMATION. 
FRONT
RIGHT
VSG74-B1MS2-R
JPY 22,000
2 left

STD
+ / - 0NOT COMPATIBLE WITH VEHICLES MANUFACTURED IN MAR 2002 OR EARLIER. "MANUFACTURING DATE" DIFFERS FROM "DATE OF VEHICLE REGISTRATION", SO PLEASE VERIFY WITH THE MANUFACTURE FOR EXACT INFORMATION. 
REAR
VSG75-B1MS2
JPY 14,000
4 left

STD
+ / - 0NOT COMPATIBLE WITH VEHICLES MANUFACTURED IN MAR 2002 OR EARLIER. "MANUFACTURING DATE" DIFFERS FROM "DATE OF VEHICLE REGISTRATION", SO PLEASE VERIFY WITH THE MANUFACTURE FOR EXACT INFORMATION. RR: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. 
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.