MAKE MODEL YEAR
Product MATRIX
Product LIST
Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible model. May be installed but the operation not guaranteed. NOT compatible
Specific model that the product will be developed for and tested on. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜YH2
     SINGLE DAMPER
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME FRONT
REAR		 PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
 DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 SET SPRING
RATE
(N/mm / Kgf/mm)
FREE
LENGTH
(mm)		 / I.D.(mm)
HONDA

ELEMENT

2003.04-2005.07		2400

4WD		YH2BASE MODELFRONT
LEFT
VSA76-A1MS2-L
JPY 24,000
3 left

STD
 
 
HONDA

ELEMENT

2003.04-2005.07		2400

4WD		YH2BASE MODELFRONT
RIGHT
VSA76-A1MS2-R
JPY 24,000
3 left

STD
 
 
HONDA

ELEMENT

2003.04-2005.07		2400

4WD		YH2BASE MODELREAR
VSA77-A1MS2
JPY 12,000
Good
in
stock

STD
 
 
HONDA

ELEMENT

2003.04-2005.07		2400

4WD		YH2BASE MODELFRONT
LEFT
VSA76-B1MS2-L
JPY 26,000
3 left

STD
 
 
HONDA

ELEMENT

2003.04-2005.07		2400

4WD		YH2BASE MODELFRONT
RIGHT
VSA76-B1MS2-R
JPY 26,000
3 left

STD
 
 
HONDA

ELEMENT

2003.04-2005.07		2400

4WD		YH2BASE MODELREAR
VSA77-B1MS2
JPY 14,000
Good
in
stock

STD
 
 
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.