MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible. May be installed but the operation not guaranteed. NOT compatible.
Under Development. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜DB22
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
Including TAX
Excluding TAX		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 RIDE
HEIGHT
CHANGE
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
TOYOTA

SUPRA

2019.05-2022.09		2000

FR		DB22SZ-R
GSTJ4-91AS3
JPY 150,700 inc
JPY 137,000 exc
Good
in
stock
F

STD
-15-35to-558.7/6.0
-15to-5195/
R

R/U
-30-60to-8118.1/12.0
-30to-20231/
[ NOTE ] FT: SERVICE HOLE COVER NEEDS TO BE CUT OR REMOVED. FT: SETTING THE RIDE HEIGHT HIGHER THAN THE STANDARD POSITION REQUIRES THE USE OF BUMP RUBBERS INCLUDED IN THE KIT. CAMBER-ADJUSTABLE INSERT-TYPE STRUT WITH OFF-CENTER SLEEVE. INCLUDES ERROR CANCELLER FOR AVS (ADAPTIVE VARIABLE SUSPENSION SYSTEM). 

     SPRING KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
Including TAX
Excluding TAX		 STOCK

SCHED		   RIDE
HEIGHT
CHANGE
(mm)		 RATE
(N/mm / Kgf/mm)
FREE
LENGTH
(mm)		 / I.D.(mm)
TOYOTA

SUPRA

2019.05-2022.09		2000

FR		DB22SZ-R
Discontinued. Limited stock left.
SKTJ4-S1B00
JPY 50,600 inc
JPY 46,000 exc
Good
in
stock		F-1035.4/3.6
264/
R-25103.0/10.5
297/
[ NOTE ] RR: CUT OE BUMP RUBBER AT 20MM FROM THE TOP AND USE THE UPPER PORTION. CUT TEIN BUMP RUBBER AT 30MM FROM THE TOP AND USE THE UPPER PORTION. ATTACH TEIN BUMP RUBBER, TEIN DUST BOOT & OE BUMP RUBBER TO THE SHOCK ABSORBER, IN THAT ORDER. RR: OE BUMP RUBBER NEEDS TO BE MODIFIED. INCLUDES BUMP RUBBER & DUST BOOT.
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.