MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible model. May be installed but the operation not guaranteed. NOT compatible
Specific model that the product will be developed for and tested on. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜Z33
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 BASE
RIDE
HEIGHT
DROP
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
NISSAN

FAIRLADY Z

2002.08-2008.11		3500

FR		Z33BASE MODEL, VERSION S, VERSION ST, VERSION T
VSP24-C1AS3
JPY 97,000
Good
in
stock
F

R/U
-10-76to+2398.1/10.0
-20to+0175/Φ65
R

R/U
-10-60to+088.3/9.0
-20to+0225/
[ NOTE ] RR: USE OF EDFC SERIES IS RECOMMENDED, AS SHOCK ABSORBER NEEDS TO BE REMOVED WHEN ADJUSTING DAMPING FORCE. 
NISSAN

FAIRLADY Z ROADSTER

2003.10-2008.11		3500

FR		HZ33VERSION ST
VSP24-C1AS3
JPY 97,000
Good
in
stock		F

R/U
-10-67to+2398.1/10.0
-20to+0175/Φ65
R

R/U
-5-63to-388.3/9.0
-15to+5225/
[ NOTE ] RR: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. 
     SPORT
NISSAN

FAIRLADY Z

2002.08-2008.11		3500

FR		Z33BASE MODEL, VERSION S, VERSION ST, VERSION T
VSP24-K1NS3
JPY 185,000
DAMPER

2 left

Can be Changed
F

R/U
-10-65to+13176.5/18.0
-20to+0150/Φ65
SPRING
R

R/U
-15-64to-4176.5/18.0
-25to-5220/
[ NOTE ] RR: WHEN ADJUSTING SPRING SEAT POSITION (RIDE HEIGHT), BE SURE TO ALSO ADJUST SHOCK ABSORBER LENGTH, TO AVOID NOISE AND/OR PREVENT SPRINGS FROM COMING OFF. FRONT SPRINGS CAN BE SELECTED FROM 16, 18, 20K. REAR SPRINGS CAN BE SELECTED FROM 18, 20K. US / UK SPECIAL ORDER ONLY : AVAILABLE SPRING RATES (MUST SELECT WHEN ORDERING)- FRONT: 16, 18, 20K / REAR 18, 20K.
NISSAN

FAIRLADY Z ROADSTER

2003.10-2008.11		3500

FR		HZ33VERSION ST
VSP24-K1NS3
JPY 185,000
DAMPER

2 left

Can be Changed		F

R/U
-10-45to+15176.5/18.0
-20to+0150/Φ65
SPRING
R

R/U
-10-62to-2176.5/18.0
-20to-2220/
[ NOTE ] RR: WHEN ADJUSTING SPRING SEAT POSITION (RIDE HEIGHT), BE SURE TO ALSO ADJUST SHOCK ABSORBER LENGTH, TO AVOID NOISE AND/OR PREVENT SPRINGS FROM COMING OFF. FRONT SPRINGS CAN BE SELECTED FROM 16, 18, 20K. REAR SPRINGS CAN BE SELECTED FROM 18, 20K. US / UK SPECIAL ORDER ONLY : AVAILABLE SPRING RATES (MUST SELECT WHEN ORDERING)- FRONT: 16, 18, 20K / REAR 18, 20K.
NISSAN

FAIRLADY Z

2002.08-2008.11		3500

FR		Z33BASE MODEL, VERSION S, VERSION ST, VERSION T
GSP24-71AS3
JPY 162,000
2 left
F

R/U
-10-68to+31117.7/12.0
-20to+0175/Φ65
R

R/U
-10-60to+098.1/10.0
-20to+0219/
[ NOTE ] RR: USE OF EDFC SERIES IS RECOMMENDED, AS SHOCK ABSORBER NEEDS TO BE REMOVED WHEN ADJUSTING DAMPING FORCE. 
NISSAN

FAIRLADY Z ROADSTER

2003.10-2008.11		3500

FR		HZ33VERSION ST
GSP24-71AS3
JPY 162,000
2 leftF

R/U
-10-72to+32117.7/12.0
-20to+0175/Φ65
R

R/U
-5-63to-398.1/10.0
-15to-3219/
[ NOTE ] RR: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. 
NISSAN

FAIRLADY Z

2002.08-2008.11		3500

FR		Z33BASE MODEL, VERSION S, VERSION ST, VERSION T
Equivalent of
SUPER DRIFT
CM-GSP24-D1AS1
JPY 239,000
Made-to-order

Approx. 1.5 months
after receipt
of order
F

P/U
-5-51to+97117.7/12.0
-15to+5175/Φ65
R

P/U
-10-20to+3798.1/10.0
-20to+0210/
[ NOTE ] RR: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. 
NISSAN

FAIRLADY Z

2002.08-2008.11		3500

FR		Z33BASE MODEL, VERSION S, VERSION ST, VERSION T
Equivalent of
SUPER RACING
CM-DSP24-81NS1
JPY 464,000
Made-to-order

Approx. 1.5 months
after receipt
of order
F

P/U
-20-40to+0117.7/12.0
-30to-10200/Φ65
R

P/U
-35-55to-15117.7/12.0
-45to-25195/
[ NOTE ] RECOMMENDED SPRING: HIGH LOAD TYPE. RR: SPRINGS CAN BE SELECTED FROM 10, 12, 14, 16K. RR: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. RIDE HEIGHT DROP SHOWN IS RECOMMENDED VALUE FOR CIRCUIT USE AND MIGHT NOT MEET VEHICLE SAFETY REGULATIONS. 

     SPRING KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED		   BASE
RIDE
HEIGHT
DROP
(mm)		 RATE
(N/mm / Kgf/mm)
FREE
LENGTH
(mm)		 / I.D.(mm)
NISSAN

FAIRLADY Z

2002.08-2008.11		3500

FR		Z33BASE MODEL, VERSION S, VERSION ST, VERSION T
CM-SKP24-G1B00
JPY 58,000
Made-to-order

Approx. 3 weeks
after receipt
of order		F-1067.7/6.9
321/
R-1070.6/7.2
288/
[ NOTE ] CAN BE PRODUCED WITH DIFFERENT RIDE HEIGHT SETTINGS. PLEASE ASK FOR PRICING. 
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.